Your distribution board decides how safely power is shared around the building. Older boards often lack residual-current protection, use worn or mismatched breakers, and simply do not have enough capacity for air conditioners, induction hobs or EV chargers.
We assess your supply and existing circuits, then design a board that protects every circuit appropriately. The result is a tidy, clearly labelled board that trips only when it should, isolates faults to one circuit and leaves room for future additions.
We measure demand and plan circuit protection.
Old board removed, new board fitted and terminated.
Every way tested, labelled and explained to you.
A typical home board replacement is completed in a single working day, with power off for part of that time. Larger commercial boards are scheduled to suit your operations.
An RCD protects a group of circuits against earth leakage. An RCBO combines that protection with overload protection for a single circuit, so one fault does not cut power to several circuits.
Sometimes the board is the cause; often the fault is on a circuit or appliance. We test first, so you only replace the board if it genuinely needs replacing.
Talk to an electrician about your problem — we will tell you the safest next step.
Tell us what is happening and get a clear quote — usually the same day.
